Select Page

Toro High Torque Auger Attachment

Toro High Torque Auger Attachment

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Quick Quote

Name(Required)

More Info

• Designed for large auger bits up to 30" (76cm)
• High Torque (Power) Drive for the most demanding conditions
• Direct planetary drive

Specifications:
Auger Speed: 57 rpm at 11 gpm (41.6 lpm), 95% efficiency
Construction: Fabricated, welded steel frame
Height: 23 in / 58 cm
Length: 16 in / 40.64 cm
Mounting Frame: Dingo® quick-attach mount plate, fabricated, welded base
Quick Couplers: Dripless, flush face quick couplers
Shaft: 2.6 in / 6.6 cm
Torque: 1515 ft/lbs at 3000 psi, at 11 gpm (461 m-kg at 207 bar, at 72 lpm)
Weight: 182 lbs / 82.6 kg
Width: 24 in / 61 cm

Additional information

Attachment Type

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo’s capability to dig 30″ (76.2 cm) holes up to 6′ (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.